I discovera few drips coming from my boing when I had a ignition lock out a week or so ago - after resetting it seemed to be fine by the pressure kept low at about 0.5 bar.
After letting cold water into the system, the pressure now keeps going up and down from 0.5 to 2.5 depending on how many radiators are on etc. I've now discover that the pressure gauge is on 0!, so had a look at it and shook it and the needle just moves around freely!? does this mean I have no pressure, or is the gauge faulty?
The heating seems to work ok, although I did get some drips coming from the pipes again last night but have stopped again now.
Any advice would be great!
After letting cold water into the system, the pressure now keeps going up and down from 0.5 to 2.5 depending on how many radiators are on etc. I've now discover that the pressure gauge is on 0!, so had a look at it and shook it and the needle just moves around freely!? does this mean I have no pressure, or is the gauge faulty?
The heating seems to work ok, although I did get some drips coming from the pipes again last night but have stopped again now.
Any advice would be great!