Bosch Dishwasher E15 code now tripping electrics

Joined
22 Dec 2009
Messages
143
Reaction score
1
Country
United Kingdom
Hi
Had the E15 code come up together with the dishwasher tripping my electrics.
Got rid of the E15 code by tilting the machine (water on floor)
Now machine runs for a while and trips the electrics (code has cleared)

Can anyone help me there please?

Thanks
 
Sponsored Links
You might have got water inside the motor when you tilted the machine. Water on floor suggests obviously that water is leaking in to the base and I believe E15 is the error message to say the base is filling with water. I had one where the motor started smoking after getting water into it. Once it got to that stage I had to fit a new motor.
 
It was already tripping the electrics before I tilted it.
 
Sponsored Links
Okay. I still think a component in the base has got wet. Could try disconnecting it from power, taking right hand side cover off and drying it well with a hairdryer perhaps? Either that or leave it several days now you have tipped the water out of the base. Usually a hole in the back isn't there, to tip out the gathered water?
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top