Hello Forum
I recently bought a second hand Bosch HydroSensor that had been used for a month, and then stored for a year or so. The machine is in pristine condition, and worked immediatly we plumbed it in.
However, this morning when I switched the machine on to do a wash the water wouldn't fill.
The cold water feed hose is attached, switched on at the mains, and I have checked the filters on both ends of the pipe (rigid black plastic) for blockages - nothing. I spoke to a friend of mine, and he suggested removing the water feed pipe, tipping the machine forward and pouring a little hot water over the filter at the machine end.
The machine promptly filled with water again and we left the cycle to run.
HOWEVER, when I filled the machine with dishes to do the next wash the feed wasn't working again, so I am back to square one.
Please please help.
Kind regards
Julie
I recently bought a second hand Bosch HydroSensor that had been used for a month, and then stored for a year or so. The machine is in pristine condition, and worked immediatly we plumbed it in.
However, this morning when I switched the machine on to do a wash the water wouldn't fill.
The cold water feed hose is attached, switched on at the mains, and I have checked the filters on both ends of the pipe (rigid black plastic) for blockages - nothing. I spoke to a friend of mine, and he suggested removing the water feed pipe, tipping the machine forward and pouring a little hot water over the filter at the machine end.
The machine promptly filled with water again and we left the cycle to run.
HOWEVER, when I filled the machine with dishes to do the next wash the feed wasn't working again, so I am back to square one.
Please please help.
Kind regards
Julie
