Bosch Logixx Dishwasher not drying

[paulrlc]

Hi,

I have little understanding of what happens in the drying stage; is it simply the the hot water sprayed on the plates that does the drying,
or is the chamber heated please?

Either way, it is not drying properly (even on extra dry time). Is
this a DIY job please? If so, what is replaced and how do you get it
out? I have had the top and sides off, and the bottom is completely
encased. It is saying 'Don't touch me!!!' lol.

Any help please?

Thanks,

Paul.

 

[JohnD]

don't know if you have a fault but:

check the manual. On some, you can turn off the drying cycle to save energy (otherwise it turns on the heating element for a while after pumping out the final rinse)

open the door at the end of a wash cycle. Steam should billow out as the plates will be very hot from their final hot rinse (this is what you do if you have turned off Drying).

 

[paulrlc]

Thanks for replying John, as I mentioned, the drying is set to 'Extra Time', certainly not 'off'.

Steam used to billow out, but no longer does.

Thanks.

Paul.