Brick bonding question

Joined
28 Jan 2011
Messages
507
Reaction score
44
Location
Manchester
Country
United Kingdom
A quick one for the brickies.... garage cavity wall with 1 brick thick solid wall return to the door. How is the inner block work fixed to the return..... he circled red bit. Is it usually bonded in, or does it need a vertical dpc......

20210326_220047.jpg


I'm wondering what the typical arrangement would be
 
Sponsored Links
Sponsored Links
It's a poor design with cavity to stop damp and a solid wall which promotes damp, so you may as well just bond it in.

And what's going on with that 100mm block wall between a garage and habitable room?
 
It's a poor design with cavity to stop damp and a solid wall which promotes damp, so you may as well just bond it in.

And what's going on with that 100mm block wall between a garage and habitable room?

Well the entire outside wall of the garage and the return thats currently there is a 9 inch solid wall that's been there since 1970 and there's never been any damp, so I think it'll be ok. And I'm considering an insulated stud wall to seperate the garage from the inhabitable space at the rear. Whats wrong with it being separated by a 100mm block wall........ the lack of insulation?
 
Why is the flank wall in cavity and the front wall solid? Is there a reason the whole thing isn't cavity work?
 
Not sure...... might be to accommodate the weight and movement of the garage door..... plus having something solid to fix the door to in the right place
 
Well the entire outside wall of the garage and the return thats currently there is a 9 inch solid wall that's been there since 1970 and there's never been any damp, so I think it'll be ok. And I'm considering an insulated stud wall to seperate the garage from the inhabitable space at the rear. Whats wrong with it being separated by a 100mm block wall........ the lack of insulation?
Did you pay someone for those plans? Whsts their refundbpolicy?

Yes the internal partition wall needs to be to the same standard as external wall, and it needs to be a fire break wall, and the door a fire doorset with a step or raised threshold. None of which is noted.

And there is no reason fire that return not to be un cavity too.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top