Burglar Alarm + problem

T

timmyquick

I am trying to set up my brothers burglar alarm, he has a Texecom veritas 8c Compact all the sensors have now been wired to the panel using the wiring diagrams & colour code from texacom all the pirs & door contacts are texecom so was very simple to do, but am confused about how to do the alarm box. On the texecom panel the connections are :-

A= Permanent Positive Supply (+12V)
B= Switched Negative to Activate Sounder
C= Negative Tamper Return
D= Permanent negative Supply (0V)
S= switched Negative to Activate Strobe

However on the Icon Alarm Box that my brother has bought it has six connections and not 5 also the lettering appears to no mean the same i.e

A= Permanent 0V from control Panel
D= permanent 12V supply from control panel
B= Switched -VE or 0V trigger4 from control panel
T= -VE tamper return to control panel
Then there is 2 symbols for strobe + and strobe _

Is it possible to wire these different makes together? if so how? or is a different alarm box required

Thanks
 
Sponsored Links
Panel________Bellbox
A___________D
B___________B
C___________T
D___________A
S___________-STOBE


Connect the terminal in the bellbox marked +strobe to terminal D in the bellbox allong with the cable from the panel (two cables in this terminal).
 
thanks Lectrician
My brother will be happy
Regards
Timmyquick
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top