cabinet hinge for a super thick door

[toadhall]

hi,
i have several standard kitchen cabinets which will have 4-5cm of decorative polystyrene mouldings stuck on (don't ask why!) making the cabinet doors effectively 6-7cm thick.

Does anyone know of a cabinet hinge that can open with doors this thick?

thanks

t

 

[foxhole]

Standard kitchen hinges will work assuming you have room to open them, if not then nothing will work.

 

[pinenot]

If it's a lay on/concealed hinge your looking for,none that I know of. If on the other hand the hinge can be "butt" hinged mounted, then you are looking at a long flap hinge, mind you that would stick out a bit when the door was closed, perhaps not what you want?
So your looking at a specific crank hinge, bent to suit both door and post/carcase. The bend on the door side flap would have to be long enough to protrude beyond the door/polystyrene moulding and the post/carcase flap cut/bent to suit.
Are the doors lay on or flush?? ...pinenot

 

[toadhall]

thanks,
the pivot point of the hinge can be outside the cabinet rather than hidden inside as with typical cabinet hinges. Do you have a picture/link of a crank hinge?
this

 

[pinenot]

From what your saying, I guess their lay on doors. Here's an image of what I mean - View media item 70856 ...pinenot

 

[toadhall]

that's the puppy
do you know of a hinge that can accommodate 6-7cm door?

 

[pinenot]

Your best idea would be by big and bend#cut to suit yourself...pinenot