i have a drayton room stat fitted and want to change it to a danfoss rmt230 only not sure how to wire it the drayton is wired like this term2 not connected term 1 is black n terminal is blue and term 3 is brown the danfoss has terminals 4 1 3 and 2 would much appreciate any help on wiring this thank you
can anyone help please
- Thread starter neil2407
- Start date
Sponsored Links
Before you do anything, check that you get 240V between the brown and the blue wires, and check at the programmer end that the black wire is not connected to earth.
The following is the best guess based on the information you've given, but remember that the colours don't mean anything if someone has wired it up unconventionally.
1 - brown
2 - black
3 - <unconnected>
4 - blue
The following is the best guess based on the information you've given, but remember that the colours don't mean anything if someone has wired it up unconventionally.
1 - brown
2 - black
3 - <unconnected>
4 - blue
Sponsored Links
E
EdwardCurrent
Now thats how a 'post' should read.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
