Hi
Could someone give me some advice on fitting a dimmer switch please?
As you can see from the picture below there are 3 red wires connecting to the switch with 3 black wires going to a blanking cap. One red wire connects to L2 with the other 2 wires attached to what appears to be 'Com' but there is a number 3 on the switch as well.
The replacement switch has 3 connectors: L1, L2 and C.
I'm assuming the equivalent L2 wire attaches to L2 on the new switch but I'm not sure where the other two wires should go.
Any advice would be very welcome.
Many thanks
LG
Could someone give me some advice on fitting a dimmer switch please?
As you can see from the picture below there are 3 red wires connecting to the switch with 3 black wires going to a blanking cap. One red wire connects to L2 with the other 2 wires attached to what appears to be 'Com' but there is a number 3 on the switch as well.
The replacement switch has 3 connectors: L1, L2 and C.
I'm assuming the equivalent L2 wire attaches to L2 on the new switch but I'm not sure where the other two wires should go.
Any advice would be very welcome.
Many thanks
LG