Can you help to identify my shower cartridge ?

[Tbone]

Hi all,

I dont know the make or model of my shower. I think the cartridge needs replaced. Can anyone help to identify it ?
The tip has 24 splines and is around 10mm dia.
The other bit with splines is around 23mm dia.
The diameter of the main body with the thread on it is around 35mm.[/img]http://farm4.static.flickr.com/3521/3903087435_d8d9515e85_o.jpg

http://www.flickr.com/photos/28347811@N06/3903087435/

 

[RigidRaider]

Presumably it's misbehaving? These can often be revived by soaking in de-scaler, apprently. Are you in a hard water area?

Send your picture to [email protected] it might be an old Crosswater valve.

 

[Tbone]

Thanks for your help,

Were not in a hard water area and I tried cleaning the cartridge.

I have posted to the address suggested.

 

[Tbone]

Hi,

Sorry its been a long time since this was posted. I cleaned the cartrisge and greased it and it worked for about a year, but it has now stopped working again.
During cleaning it I noticed its made by a company called ZIPPONI.

Does anyone know this brand ?

 

[Jake1886]

Check out www.lunns.net

Excellent company with a wide ranging stock. And if you e-mail over a picture of the cartridge they should be able to identify it or match it with a custom cartridge.

Hope this helps