cat sleeping on tiled UFH...overheating issues?

Joined
29 Nov 2011
Messages
177
Reaction score
1
Location
Manchester
Country
United Kingdom
There's no doubt my moggy loves the newly installed UFH as she's preferring it to the sunny sill and even beds and sofa.
Are there any risk of overheating? The temperature of the floor is set to a maximum of 27 degrees (still mild), and the cat isn't sleeping where the probe is located so the temperature of the cat's area is higher than the 27 degrees registered by the probe.
Common sense tells me the UFH is safe....simply because 27 degrees maximum is still pretty average - am I right? (or shall I find a better bed for my moggy?)
 
.
Not if I have anything to do with it.

myspace-cats-images-0005.jpg
 
on a slightly more serious note.....

If the UFH stat fails and the UFH heats continuously, the cat will get up and move when it becomes uncomfortable, long before it's damaging
 
on a slightly more serious note.....

If the UFH stat fails and the UFH heats continuously, the cat will get up and move when it becomes uncomfortable, long before it's damaging

thanks for taking it seriously...
If we should avoid permanently covering UFH areas with furniture....then a cat should be even worst as they generate heat themselves - on a positive side, a cat moves away from time to time - still the surface of the tile isn't as hot as the actual cable.
 
the cat will get up and move when it becomes uncomfortable, long before it's damaging
Possibly not....

We had a cat who curled up in front of the singe bar electric fire and wouldn't move even when her fur was scorching.

The fur insulates the skin from the heat source so the cat can feel comfortable even if the fur is burning.
 
the cat will get up and move when it becomes uncomfortable, long before it's damaging
Possibly not....

We had a cat who curled up in front of the singe bar electric fire and wouldn't move even when her fur was scorching.

The fur insulates the skin from the heat source so the cat can feel comfortable even if the fur is burning.

I suspect the situation might be somewhat different with UFH, as a) a cats fur is thinner on it's underside and b) the weight of the cat presses its skin, at least in places, into contact with the tiles.

I would analogise this to a human standing in front of a fire, then sitting down and burning your legs with your hot trousers, and sitting directly onto the fire. Your trousers insulate you similarly.

Also, i doubt there is any UFH even in fault conditions that could put that much heat through a tile. You're talking 50C+ before burns occur
 
no worries about any cat being burned here....rather if an UFH system can get damaged by a cat sleeping too much over it :)
 
I would be more worried about tripping over the cat because its on the bathroom floor.

Other than that I see there being no problem with either.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top