Good spot.
Not sure... It was a disconnected spade plug with boot!
Pump runs when I spin the fan impeller.
CBB65 start capacitor?
- Thread starter dilalio
- Start date
Good spot.
Not sure... It was a disconnected spade plug with boot!
Pump runs when I spin the fan impeller.
- Joined
- 22 Jan 2007
- Messages
- 23,875
- Reaction score
- 3,479
- Country
This is a serious question, I'm not trying to be clever.
For your first query you could have got a CBB65, which are readily available, but chose to get a CBB60.
For your second query you can't get the correct CBB65 off the shelf, but won't get a CBB60 because it isn't the right one?
For your first query you could have got a CBB65, which are readily available, but chose to get a CBB60.
For your second query you can't get the correct CBB65 off the shelf, but won't get a CBB60 because it isn't the right one?
I get your point.
The first one was in a plastic can so looked pretty much like a 60.
2nd one metal can so just my gut feeling tbh.
Just by the "look" of one component against a replacement!
Perhaps I should have tried ebay for the first one, as they seem to have a wider range than amazon
- Joined
- 22 Jan 2007
- Messages
- 23,875
- Reaction score
- 3,479
- Country
They are also filled differently. I would just have stuck to the same number as that installed, but I know it might not matter too much.I get your point.
The first one was in a plastic can so looked pretty much like a 60.
2nd one metal can so just my gut feeling tbh.
Just by the "look" of one component against a replacement!
Perhaps I should have tried ebay for the first one, as they seem to have a wider range than amazon
Got new cap in.
Think it's the board as it runs when all sensor terminals are linked out and also a link from L in to M (motor).
Well... May also be sensors but 1 at a time eh!
Think it's the board as it runs when all sensor terminals are linked out and also a link from L in to M (motor).
Well... May also be sensors but 1 at a time eh!
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local