I've given my ceiling 5 coats and when the light catches it the streaks are horrendous . Is it the paint? ,(Johnsons Matt emulsion).
If so can anyone recommend one?
If so can anyone recommend one?
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Ceiling
- Thread starter a9blue
- Start date
I've never had problems whenever using Johnstones but I always use trade range rather than standard.
Leyland, Glidden even Dulux (all trade) give great results. Vinyls can cause streaking/roller marks so you might prefer a contract matt, although the finish isn't quite as hard wearing.
Give the surface a very light sanding, (180/240 grit sandpaper) and dust off before you apply any more coats.
Leyland, Glidden even Dulux (all trade) give great results. Vinyls can cause streaking/roller marks so you might prefer a contract matt, although the finish isn't quite as hard wearing.
Give the surface a very light sanding, (180/240 grit sandpaper) and dust off before you apply any more coats.
My ceiling was starting to fall so I pulled it down and need to replace it, but am not sure what to use. I removed horse hair plaster which was up to an inch/25mm thick and want the equivalent or better sound resistance. Can anyone recommend the appropriate thickness of plasterboard and/or should I use insulated board (I'm not that bothered about heat, but wouldn't mind if it insulates a bit better)?
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
