I have a potterton puma 80, The hot water works fine although the central heating takes quite a while to heat up. I have flushed out and removed any dirt from the system. I have been told by a friend that it could be the diverter valve, Does anyone have any other ideas?
Central heating barely getting hot.
- Thread starter DannyF
- Start date
Sponsored Links
It probably is the diverter valve but the real cause may be a dripping hot water tap !!!
You can check that by turning off the cold water in and seeing if that makes any diffference to the heating.
Note it takes about 5-10 minutes for the heating to restart after using hot water!
Tony
You can check that by turning off the cold water in and seeing if that makes any diffference to the heating.
Note it takes about 5-10 minutes for the heating to restart after using hot water!
Tony
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
