I got myself a Drayton MA1 actuator from my local plumber merchants and am looking to install it myself.
I cannot see it being much of a problem - hopefully the wiring colours will be the same and it is only doing up 3 fittings.
I know I need the drain the tank down. If I close the supply valve to the tank and turn off the stop cock , I guess I drain it by opening a hot water tap on the bath.
Any help would be much appreciated.
Thanks in advance.
I cannot see it being much of a problem - hopefully the wiring colours will be the same and it is only doing up 3 fittings.
I know I need the drain the tank down. If I close the supply valve to the tank and turn off the stop cock , I guess I drain it by opening a hot water tap on the bath.
Any help would be much appreciated.
Thanks in advance.