I am changing from a Flashguard 100 XL bellbox to a Texacon Odyssey 1/1E
The main unit is a OPTIMA XM6.
There are six wires going into the 100 XL bell box, these are,
Tamper settings NEG. SUPPLY D=RED . A=BLACK. TRIGGER B=BLUE (only the neg terminal is used on the trigger section). TAMPER. T=YELLOW (only OUT used on tamper section). STROBE. NEG=GREEN and POS = WHITE
On the Texecom Bell box there are only five connections these are, +VE supply A = RED. -VE Bell B = Blue.. -VE Tamper C=Yellow. OV D=Black. and -VE Strobe S=Green.
There is no terminal for the White wire (+ Strobe).
I would also like to stop the strobe flashing when the siren stops
The main unit is a OPTIMA XM6.
There are six wires going into the 100 XL bell box, these are,
Tamper settings NEG. SUPPLY D=RED . A=BLACK. TRIGGER B=BLUE (only the neg terminal is used on the trigger section). TAMPER. T=YELLOW (only OUT used on tamper section). STROBE. NEG=GREEN and POS = WHITE
On the Texecom Bell box there are only five connections these are, +VE supply A = RED. -VE Bell B = Blue.. -VE Tamper C=Yellow. OV D=Black. and -VE Strobe S=Green.
There is no terminal for the White wire (+ Strobe).
I would also like to stop the strobe flashing when the siren stops