-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
changing light fixing
- Thread starter bertietee
- Start date
You need to copy the existing connections.
Make a note of where each wire goes.
Make a note of where each wire goes.
When you say 2 way light, do you mean the switching is 2 way? Or do you mean the new light fitting only has two connectors as opposed to the four connections the old ceiling rose has??? The live and neutral will go to the '2 way' connector block.
IF there is a blue wire on its own with a brown sleeve this should be L.
Remaining two blues should be N.
You need two additional connector blocks:
One for three browns only.
One for all earth wires.
IF there is a blue wire on its own with a brown sleeve this should be L.
Remaining two blues should be N.
You need two additional connector blocks:
One for three browns only.
One for all earth wires.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
