1. Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.
    Dismiss Notice

Changing the rear exhaust rubber (Megane)

Discussion in 'Car Repairs / Maintenance' started by adamtango, 4 Apr 2009.

  1. adamtango

    adamtango

    Joined:
    4 Apr 2009
    Messages:
    3
    Thanks Received:
    0
    Country:
    United Kingdom
    Hi everyone ,

    i have the usual enhaust problem with the megane (2.0 sport) , the rubber that holds the back box is totally perished.

    i have ordered a new one from ebay (£2.50) so im hoping to sort the problem before it gets worse.

    The ebay advert states; "THEY TWIST INTO THE CHASSIS AND WITH AGE BECOME PERISHED AND SNAP LEADING TO EXSPENSIVE EXHAUST DAMAGE"

    so far i have managed to remove the remainder of the old rubber from the exhaust , however the old rubber stub remains in the chassis hole.

    theres not much left on it so i can't really twist it out , have tried to pull it out with no luck , tried to push it in also (again with no luck).

    Any ideas ?

    Thanks in advance. Adam
     
  2. Sponsored Links
  3. mattylad

    mattylad

    Joined:
    27 Apr 2008
    Messages:
    7,903
    Thanks Received:
    582
    Country:
    United Kingdom
    cut it?
     
  4. adamtango

    adamtango

    Joined:
    4 Apr 2009
    Messages:
    3
    Thanks Received:
    0
    Country:
    United Kingdom
    I have cut as much as possible , the only bit remaining is the stub which i have but all the way back to the chassis.

    The bit im having a problem with is the bit concealed behind the stub , the bit with the square ends on that twists into the chassis.
     
Loading...

Share This Page