clamp on gable detail/ cut up profiles

[mikric]

Does any one have a link that can point me in direction of those adjustable profiles for brickies to use on gable ends, the adjustable ones that clamp onto the last truss/rafter, I have seen them before somewhere but have googled just about everything I can think of and cant find them. Cheers

 

[theoldun]

mikric. No profiles on market to clamp on trusses or rafter.
Quite a few profiles on market now, all copied from Blakes, the original profile and still the best followed by Mustang.
With Blakes you can set up on green corner, with Mustang, pulls corner over.
Use Blakes on gables. Bracket out on plate lift, gives you about 20 course we have extensions made up to drop into top of profiles, gives another 10 course.
Don‘t really need them on gables, batten nailed top of truss, overhanging facework, same on bottom, both sides, line top to bottom, both ends, plumb line up to face at top, work to line.
Believe you are BCO. Got a question would like to ak you.
old un

 

[mikric]

I have seen them somewhere !! they clamp onto end truss top and bottom and have like a cranked bar with thumbscrew adjusters to alter depth for cut ups/protrusion etc
You have a question, fire away

 

[gigzyboy]

Here you go.
About £80 I think.

http://www.slatelines.co.uk/index.html

 

[mikric]

What a star cheers

 

[theoldun]

mikric, My sincere apologies for opening my big mouth and giving you incorrect information.
I should have said, To the best of my knowledge.
Thank you gigzy for correcting me.
Question posted, building forum.
Joining conservatory water to existing house downpipe. Dated Sat 8/5/10. Would appreciate your opinion.
Regards. old un.

 

[gigzyboy]

Here you go.
About £80 I think.

http://www.slatelines.co.uk/index.html[/QUOTE]



Check this site out :

http://websites.uk-plc.net/Blakes_Building_Profiles/products/Blockdolly.htm

 

[slatelines]

mikric. No profiles on market to clamp on trusses or rafter.
Quite a few profiles on market now, all copied from Blakes, the original profile and still the best followed by Mustang.
With Blakes you can set up on green corner, with Mustang, pulls corner over.
Use Blakes on gables. Bracket out on plate lift, gives you about 20 course we have extensions made up to drop into top of profiles, gives another 10 course.
Don‘t really need them on gables, batten nailed top of truss, overhanging facework, same on bottom, both sides, line top to bottom, both ends, plumb line up to face at top, work to line.
Believe you are BCO. Got a question would like to ak you.
old un

 

[slatelines]

Hi builders there is such a tool for gables go to SLATELINES and check out the best tool on the market