Combi boiler advice

Joined
5 Mar 2008
Messages
2
Reaction score
0
Location
Southampton
Country
United Kingdom
Hi,
Sorry this is probably a dumb question but we have just moved to a new house with a combi boiler. One radiator is fairly cold so I thought I would bleed it. so far so good. it hissed and expelled loads of air as I expected but then the boiler started flashing its warning light ... the pressure gauge dropped right down to zero and nothing would work. I pressed the reset and exentually all came back on. I am confused how bleeding a radiator could cause such mayhem. Any advice would be greatly appreciated as if I do that again my wife will beat me to death with a large rolling pin :eek:

Thanks.
 
Sponsored Links
Hi by venting rad you have depressurised system see FAQ6.
 
HI


you need to top up water in your boiler .
look for FILLING LOOP silver flexible pipe or any filling key ion your boiler
 
Sponsored Links
Thanks ever so much. I did look in the FAQS but didnt register the solution with the problem. Thanks again. This is a great forum.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top