Compression elbow from isolator to tap tail

[bullethead123]

I want to put a compression elbow directly onto a 15mm isolator valve and connect a flexible tap tail onto the orher end.
Can anyone steer me in the right direction of the elbow I will need pls?
Chris.

 

[thomp1983]

Do you have a picture of what your planning, you should be able to connect a flexi tap tail straight onto the Iso, just file any sharp edges off the thread.

 

[Madrab]

Like one of these? really only able to use a 1/2" BSP female to male elbow. You will need to use PTFE too on the female end