Concealed hinge screws

Joined
27 Jun 2007
Messages
28
Reaction score
0
Country
United Kingdom
bought some wardrobes and need a bit of quick advice please,
the holes for the concealed hinge plate on the carcase are not pre drilled so what size drill bit should I use for them , The screw size is 6.3 x 10, also do I use the same size drill for 6x 16 of the same type of screw . Thanks
 
Sponsored Links
5mm is the standard hole size, both your system screws will fit that.

Assuming the door slay over the carcase then drill the holes 37mm from the face and 32mm apart. A 5mm "brad point" drill will give the cleanest hole

Jason
 
Thanks and thanks for the positioning info ..
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top