- Joined
- 22 Oct 2015
- Messages
- 82
- Reaction score
- 5
- Country
Evening all
I'm 80% of the way through getting our new Insinkerator food disposal unit installed.
As part of the install, I took the opportunity to replace the 15 year old p-trap with a new McAlpine unit.
The challenge I've got is that the drain outlet on the Insinkerator is probably 15-20mm lower than the side inlet on the main waste.
[/IMG]
Unfortunately I can't drop the outlet bottom left, but I could drop the u-bend down I guess...
I'm wondering if something like this would be suitable for making the 90 degree turn: http://www.screwfix.com/p/mcalpine-flexicon4-flexible-connector-white-40-x-157-242mm/86386
For reference, the top down view is:
Thoughts?
Cheers
Gavin
I'm 80% of the way through getting our new Insinkerator food disposal unit installed.
As part of the install, I took the opportunity to replace the 15 year old p-trap with a new McAlpine unit.
The challenge I've got is that the drain outlet on the Insinkerator is probably 15-20mm lower than the side inlet on the main waste.
Unfortunately I can't drop the outlet bottom left, but I could drop the u-bend down I guess...
I'm wondering if something like this would be suitable for making the 90 degree turn: http://www.screwfix.com/p/mcalpine-flexicon4-flexible-connector-white-40-x-157-242mm/86386
For reference, the top down view is:
Thoughts?
Cheers
Gavin