Cooke and lewis Zale monobloc tap - what cartridge?

[jammers]

Hi Guys,
I have this tap (link below).
Before I take the cartridge out, I would like to have one ready to go in, but I can't determine what cartridge i need?
It says its a 1/4 turn ceramic valve, but there seems to be different height etc.
Can someone help please?
Ta
James
https://www.trade-point.co.uk/depar...ern-kitchen-monobloc-mixer-tap/1073416_TP.prd

 

[jj4091]

Seems just as cheap to buy complete assy.

 

[jammers]

Seems just as cheap to buy complete assy.

They aren't available anymore - if you notice there is no buy button

 

[denso13]

The only way to get the correct one is to carefully measure the old one. There are loads https://shop.lunns.net/ceramic-disc-valves-42-c.asp

 

[muggles]

As denso says, Lunns will be able to help you. It might well cost more than a new tap though. Those Cooke&Lewis taps, along with other DIY shed own brands, aren't designed to be repaired

 

[jammers]

Thanks Guys.
Just counted the splines. theres 20 and the hex nut is 17mm.

I see what you mean about Lunns - they are expensive!!

 

[Gasplumber]

Just get a new tap.
Guaranteed fix and you could get it done by tomorrow evening!

 

[jj4091]

They aren't available anymore - if you notice there is no buy button

They have them available in one of my local B & Q stores have you checked on line for one near you.

 

[jammers]

Really I will check again, but on my one it didn't come up with buy or add to cart? Is that b and q or tradepoint?

 

[jj4091]

B & Q
I would attach a link but there is a wait time on their website, I guess they are busy.

 

[Gasplumber]

B & Q
I would attach a link but there is a wait time on their website, I guess they are busy.

you can dodge some waits by turning java off in your internet settings.
Can on wickes site anyway as I’ve being doing it