H
hotrod
You guys should be on stage 
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Crack appeared after removing internal load bearing wall
- Thread starter spinalwiz
- Start date
Hi,
Thanks for all your suggestions - have talked it through with the builder and most liketly it was to do with the acros being removed too soon as suggested. Hopefully this has just lead to some settling onto the steel and their will be no further movement. The builder made good the crack before I could get a photo (suspicious?!), but at least will be able to tell if there is any more movement. Building inspector coming on Tuesday to take a look.
Thanks for your help - was very useful!
Thanks for all your suggestions - have talked it through with the builder and most liketly it was to do with the acros being removed too soon as suggested. Hopefully this has just lead to some settling onto the steel and their will be no further movement. The builder made good the crack before I could get a photo (suspicious?!), but at least will be able to tell if there is any more movement. Building inspector coming on Tuesday to take a look.
Thanks for your help - was very useful!
I did a similar job recenly, used 8 acrows for a 13' steel, left them in for 4 days after fitting the steel, no movement at all! must have been in way too much of a rush takin them out that soon
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
