I have two sets of cupboard doors in the house. Both are of hollow construction and in both cases the Right hand door won't shut because they're slightly warped. I've been looking for a strong catch to hold it in place, but so far drawn a blank. Ideally I would like one of those closers where you turn the outside handle and steel rods latch top & bottom one going up and one going down. Any suggestions please ?
Cupboard Doors
- Thread starter kbultray
- Start date
Sponsored Links
a small bolt on the warped door
http://www.toolstation.com/shop/Door+Bolt+Brass/p37191
and a magnetic or roller catch on the other
http://www.toolstation.com/shop/Twin+Roller+Catch/p42384
http://www.toolstation.com/shop/Door+Bolt+Brass/p37191
and a magnetic or roller catch on the other
http://www.toolstation.com/shop/Twin+Roller+Catch/p42384
You could try correcting the doors that are warped by clamping a straight batten clamped edge on to the stile/edge that's bent, blocked at the appropriate places then clamp the section that's out of line (no blocks) beyond the straight line, and leave overnight - View media item 75093 ...pinenot
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
