I bought a new build house a few years ago and in the main bathroom, specifically at the end of the bath is a boxed area slightly wider than the bath which was tiled completely, as part of the specification. (In fact the whole bathroom was tiled floor to roof).
I've pulled the side cover of the bath to have a look, and can see that this boxed area is just an empty area, and so I thought it would be quite useful to frame the inside of it in and convert it into some shelving and front it with doors. I'd like to keep the fully tiled look if possible, so step 1 would be to cut from the existing tiled area a panel section to be used as 'doors'.
Any advice\tips on how to cut the tiles which are in place, with the minumum of damage, would be greatly appreciated.
I'll take some pics later to show you the area I'm talking about.
Cheers
I've pulled the side cover of the bath to have a look, and can see that this boxed area is just an empty area, and so I thought it would be quite useful to frame the inside of it in and convert it into some shelving and front it with doors. I'd like to keep the fully tiled look if possible, so step 1 would be to cut from the existing tiled area a panel section to be used as 'doors'.
Any advice\tips on how to cut the tiles which are in place, with the minumum of damage, would be greatly appreciated.
I'll take some pics later to show you the area I'm talking about.
Cheers