Turbomax 824 has started cycling on the central heating after i refitted a rad after decorating. Bled the system etc and all was fine but now when the heating is on it gets to about 82 and then cuts off. Drops to about 60 then kicks in again.
This may seem what its designed to do but it wasnt doing it before. It has just a timerclock fitted and the manual switch to turn the heating on.
All bar a few rads have trvs on them. All trvs and locksheilds are open now.
Really at a loss now. Changed the pump and used x800 as i thought it may be a blockage. Used a thermal camera and all the rads warm up perfect with no cold spots. Any help is masively appreciated.
This may seem what its designed to do but it wasnt doing it before. It has just a timerclock fitted and the manual switch to turn the heating on.
All bar a few rads have trvs on them. All trvs and locksheilds are open now.
Really at a loss now. Changed the pump and used x800 as i thought it may be a blockage. Used a thermal camera and all the rads warm up perfect with no cold spots. Any help is masively appreciated.