danfoss 4033 replacement

Joined
22 May 2024
Messages
5
Reaction score
0
Country
United Kingdom
hi everyone-danfoss 4033 packed in -want to replace it with a danfoss fp 720 the 4033 controls a three way mid position valve (the valve is new)the current wiring is as shown on the danfoss website wiring diagram as follows=one red wire to terminal 1 one red wire to terminal 2 terminal 3 is unused one yellow wire to rerminal 4 one blue wire to terminal 5 three red wires to terminal 6 rwo terminal wires to terminal 7 two earth wires to terminal 8 the 720 unit only has 6 terminals-any ideas how to wire up the 720 i have heard the 720 will work but not quite in the same way as the old unit -best regards
 
Last edited:
Sponsored Links
1716400300960.pngThe old controller to new 1716400406126.pngso 7 = N, 6 = L, 5 = 1, 4 = 3, 3 = 2, 2 = 4 and 1 will likely go to L but there is no 1 on the replacement so that is a bit of guess work.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top