I have a Danfoss lockshield valve on a radiator. This is the lowest rad in the system and I want to install a drain valve. Danfoss make drainvalve additions that fit onto these locksheild valves, like this:
https://www.cityplumbing.co.uk/Danfoss-RLV-Only-Drain-Cock-Adaptor-003L015200/p/342036
I'm struggling to work out if I have an RLV, RLV-S, RLV-D or other lockshield currently fitted. Once I know that I can hopefully buy the right drain tap, if there is one.
Mine looks like this:
There is a hex socket behind the cap on the left side.
Can anyone identify it, and confirm if a drain valve can be fitted? Thanks.
http://cz.danfoss.com/PCMPDF/VDQBH302_RLV_teamcen.pdf
https://www.cityplumbing.co.uk/Danfoss-RLV-Only-Drain-Cock-Adaptor-003L015200/p/342036
I'm struggling to work out if I have an RLV, RLV-S, RLV-D or other lockshield currently fitted. Once I know that I can hopefully buy the right drain tap, if there is one.
Mine looks like this:
There is a hex socket behind the cap on the left side.
Can anyone identify it, and confirm if a drain valve can be fitted? Thanks.
http://cz.danfoss.com/PCMPDF/VDQBH302_RLV_teamcen.pdf
