When installing a Dimpull, which colour wire (brown or blue) is LOAD and which is SUPPLY - instructions are confusing.Simply which wire goes on which hole?
Dimmer pull cord
- Thread starter basilbrush
- Start date
Providing that the cable is a standard live and switched live, then you should wire it as follows:
Brown - supply
Blue - load
You must also put a piece of brown sleeving or tape onto the blue wire to identify it as a switched live.
If there is more than one twin and earth then please post back with more details.
Brown - supply
Blue - load
You must also put a piece of brown sleeving or tape onto the blue wire to identify it as a switched live.
If there is more than one twin and earth then please post back with more details.
Fantastic.
Light Dimming, house apparently not on fire.
Job Done. Thanks very much.
Light Dimming, house apparently not on fire.
Job Done. Thanks very much.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
