Hi I have a diplomat dishwasher ADP 8132 (i think) and it is giving me a F7 fault, so following notes on a previous post in this forum and cleaned the terminals on the plug connection at the front left (can't remeber what it's called), and also checked all the plugs and mountings inside the dishwasher. i turned it on again and then got an F6 fault.
Again i did the same and checked all the plugs and connections, then tried again. now getting and F7.
I have tried this several times, and now keep getting the F7. it looks like i'm going to have to replace a part but i have been told that i need to change about three parts the inlet valve, drain pump and fill chamber assembly at £70, £35 and £50.
Any help would be much appreciated.
Again i did the same and checked all the plugs and connections, then tried again. now getting and F7.
I have tried this several times, and now keep getting the F7. it looks like i'm going to have to replace a part but i have been told that i need to change about three parts the inlet valve, drain pump and fill chamber assembly at £70, £35 and £50.
Any help would be much appreciated.
