Dishwasher not hot

Joined
22 Oct 2010
Messages
39
Reaction score
1
Country
United Kingdom
Our diswahser - Bosch sgs8812/gb runs through the whole cycle ok, but doesn't get things properly clean. It's not that the water stays cold, it just gets warm. I've taken the whole thing to bits and tested the heater which, from what i understand seems ok (testing with a digital multimeter it gives a reading and then goes to 0). Just to confirm, yes it's connected to cold fill.
Any suggestions as to my next step?
 
I would not expect it to run if the water does not get to temp.
Have you checked all the spray arms, ie not blocked, rotate & are getting the water, check seals. where water enters the spray arm assy.
 
Seems to run ok, water gets into the system and MOST things get cleaned, but not greasy stuff eg butter on knives, and as i say it seems to get warm but not hot.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top