Downlight Replace and Damage Repair

[Drdub]

Hi

We have some old downlights in a bedroom ceiling. We currently have 24v with transformers and I want to replace with mains volt LED. Is there a preferred brand that won't break the bank but do the job?
Also, the existing cutout in one fitting has crumbled over the years and plain filler won't do the job, what's the best way to fix the problem? Close-up photo attached, any help would be much appreciated. Thanks

 

[foxhole]

Oversize downlight, no repair required.

Integral LED 70-100mm Cut Out Evofire IP65 Fire Rated Downlight

For safe, stylish and reliable lighting that’s easy to install with a 70-100mm cut-out, this Integral LED EvoFire fire-rated downlight is the perfect choice. The ultra-thin 1mm bezel fits flush against the ceiling for a discreet and attractive finish, while the canless design helps the lamp run...

www.toolstation.com

 

[Murdochcat]

What size was the original hole?

My normal tactic is to fit “tilt” downlights as they need bigger holes and don’t fit sealed led units - because when they go wrong you have to replace the whole unit which means taking them out of the ceiling AND further potential damage to the ceiling

 

[Drdub]

What size was the original hole?

Original hole was 65mm. I thought of LEDs as a way of saving electricity.

 

[foxhole]

Original hole was 65mm. I thought of LEDs as a way of saving electricity.

Yes LEDs will save you money .

 

[Wayners]

Use c fix

C-Fix Repair Kit (Single)

> size guide Allows you to REPAIR, RESIZE, REPOSITION and REINFORCE damaged downlighter cut outs in ceilings. Fire Resistant Adjustable for ceilings up to 15mm thick Installed from below the ceiling Fits inside the ceiling space (invisible from below) Compatible with most standard...

c-fix-downlighter.com

Some make one from something like a soup can..

 

[Murdochcat]

Original hole was 65mm. I thought of LEDs as a way of saving electricity.

You can get LED GU10 bulbs