-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Drawer front has came off
- Thread starter rezarf
- Start date
some images of the drawer itself - rear view of the front & also where it fits onto the drawer unit alongside each other would be useful & perhaps one of a drawer which is already fitted
Looks like a screwed down on the front is then tightened from the side to secure & pull it all tight & together....
Looks like a screwed down on the front is then tightened from the side to secure & pull it all tight & together....
I think they snap into place , the screw slots are to adjust the draw front levels.
I finally figured out how to release the fittings. There is a PhilIps shaped gap located inside the middle rectangle hole.
I couldn't see it at first as the mechanism was hidden. I used the screws which allow for height adjustment and there it was.
A quick turn with a screwdriver and it popped out. Put it all back together and secured it better and the job is done.
Thanks everyone.
I couldn't see it at first as the mechanism was hidden. I used the screws which allow for height adjustment and there it was.
A quick turn with a screwdriver and it popped out. Put it all back together and secured it better and the job is done.
Thanks everyone.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
