Hi, I have a WB Greenstar 37cdi combi boiler with the DT10Rf optimising programmer.
The programmer is randomly dropping the rf connection with the boiler. Can happed several times a day or once every few days. Have also used the learn facility several times to re-connect the rf link. There is 1 stud wall and 1 brick wall between the programmer and the boiler (approx 6m). Changed batteries etc, still the same.
The programmer makes the rf link with the boiler mounted receiver without problem and operates for long periods without dropping the connection.
Have ruled out our wireless router and cordless phone, still does it when they are turned off. No other wireless devices in the house. Neighbours either side have other kinds of boiler. I have moved the programmer twice as far away from the boiler as it is normally positioned within the house and it still works for periods then drops the connection.
Worcester Bosch have replaced the programmer and receiver and it is just the same. If the battery is taken out of the programmer and then replaced it re-makes the rf connection straight away but then drops it later.
Anyone got any ideas to resolve this without reverting to a wired connection?
Cheers
The programmer is randomly dropping the rf connection with the boiler. Can happed several times a day or once every few days. Have also used the learn facility several times to re-connect the rf link. There is 1 stud wall and 1 brick wall between the programmer and the boiler (approx 6m). Changed batteries etc, still the same.
The programmer makes the rf link with the boiler mounted receiver without problem and operates for long periods without dropping the connection.
Have ruled out our wireless router and cordless phone, still does it when they are turned off. No other wireless devices in the house. Neighbours either side have other kinds of boiler. I have moved the programmer twice as far away from the boiler as it is normally positioned within the house and it still works for periods then drops the connection.
Worcester Bosch have replaced the programmer and receiver and it is just the same. If the battery is taken out of the programmer and then replaced it re-makes the rf connection straight away but then drops it later.
Anyone got any ideas to resolve this without reverting to a wired connection?
Cheers