I am at the end of any more sensible solutions for getting my domestic Ecozi Rainwater Harvester working with anything other than the outside tap.
Does anyone have any experience of rainwater systems and std toilet systems. I believe that the problem stems from the fact that the standard fill on my new low level systems does not stop immediately and trickles until the valve is completely closed off by the float, this means that pressure loss if very slow and the pump controller does not kick in and all pressure is lost in the system.
Can you replace the std system float valve with a valve that cuts off abruptly?
Would love to hear from people who have successfully fitted an Ecozi system.
Does anyone have any experience of rainwater systems and std toilet systems. I believe that the problem stems from the fact that the standard fill on my new low level systems does not stop immediately and trickles until the valve is completely closed off by the float, this means that pressure loss if very slow and the pump controller does not kick in and all pressure is lost in the system.
Can you replace the std system float valve with a valve that cuts off abruptly?
Would love to hear from people who have successfully fitted an Ecozi system.