EDPM Roof, and other quandaries...

[charliegolf]

Hi All

I have just put up a sips garden room shell made from 97mm sip panels, roof included.

I'm scratching my head over fascias. They don't come in 97mm seemingly! Therefore,

Do I cut the fascia back to flush with the roof deck, and just carry on with the rubber roof install? Or is ther a better product for such a small thickness?

If yes, cut em down, which is the best way to cut them? Blade and snap/saw?

Thanks.

 

[Alastairreid]

Fascia goes flush with the deck with epdm trims and can overhang the joists, soffit at the bottom.

 

[noseall]

Hi All

I have just put up a sips garden room shell made from 97mm sip panels, roof included.

I'm scratching my head over fascias. They don't come in 97mm seemingly! Therefore,

Do I cut the fascia back to flush with the roof deck, and just carry on with the rubber roof install? Or is ther a better product for such a small thickness?

If yes, cut em down, which is the best way to cut them? Blade and snap/saw?

Thanks.

What type of 'fascia' are we talking here?

 

[charliegolf]

9mm plastic cover boards. Sorry, an important detail!

 

[Notch7]

9mm plastic cover boards. Sorry, an important detail!

you could cut down 150mm fascia boards -circular saw is probably quickest way

or use them full size and batten below for the fascia

I would have a look at how much room the gutter and brackets take up before deciding

 

[noseall]

9mm plastic cover boards. Sorry, an important detail!

Go up to 125mm and add a knock on or let it fly.

 

[charliegolf]

Noseall, for the hard of thinking, what's a knock on?

 

[noseall]

Noseall, for the hard of thinking, what's a knock on?

add a length of 115mm PAR to the edges first