Hi All,
I have purchased an electric inset fireplace to replace an old gas one which has been removed. I want the electric fire to be thermostatically controlled.
My problem is that I have purchased a Drayton RTS8 with a 13A fused switch to control the fire BUT it says its suitable for current loads of 0.1A to 6A.
This is the fire:
http://www.dimplex.co.uk/products/fires_surrounds/inset_fires/kansas/index.htm
I assume I will need to either put something in between or get a different thermostat?! Any advice welcome. Thanks!
I have purchased an electric inset fireplace to replace an old gas one which has been removed. I want the electric fire to be thermostatically controlled.
My problem is that I have purchased a Drayton RTS8 with a 13A fused switch to control the fire BUT it says its suitable for current loads of 0.1A to 6A.
This is the fire:
http://www.dimplex.co.uk/products/fires_surrounds/inset_fires/kansas/index.htm
I assume I will need to either put something in between or get a different thermostat?! Any advice welcome. Thanks!