Hi guys,
Setting up the controller for electric under floor heating.
The controller is asking:
"Select the approximate load of the heating element (w) to estimate installation power consumption (kWh)."
I asked the electrician who installed it and he said
"It is 150W per m2 - you have 2 m2 total of 300W"
Should I set the output as 150w or 300w?
I've attached a photo of the settings.
Thanks,
Setting up the controller for electric under floor heating.
The controller is asking:
"Select the approximate load of the heating element (w) to estimate installation power consumption (kWh)."
I asked the electrician who installed it and he said
"It is 150W per m2 - you have 2 m2 total of 300W"
Should I set the output as 150w or 300w?
I've attached a photo of the settings.
Thanks,