I've got a wet ufh system with an asphalt top that was uneven has now been screeded and is fairly level. I've been reading and reading about engineered wood but read a few conflicting bits about floor temps and gluing the floor down for conductivity as a pose to using underlay. Also I really want to make sure the ufh works well I've tried putting a single board into bare floor and the wood just doesn't not warm up... Does anyone have experience of this .. does the wood heat up well and hold heat?
If it really is a risk I'll just use karndean again as it conducts heat really well
If it really is a risk I'll just use karndean again as it conducts heat really well