F2 fault on Glow Worm 24ci

[steve6501]

Hi

I have an F2 flashing in display. (Manual says Air Fault...check air switch of Fan)

The fan does not start and testing with a multimeter shows no power at fan. Wiring checks out ok back to circuit board.

Anyone come across this before....does it mean a replacement circuit board or maybe its a common fault requiring a new part on the board?

thanks

S

 

[cowley]

Have you tried reseting the boiler? turn off at fused spur and back on.

 

[steve6501]

Have you tried reseting the boiler? turn off at fused spur and back on.

Yes it was off all day today and still had same problem tonight


Any advice on where to get spares?

 

[cowley]

Afraid your going to need a RGI you can't do this one yourself.

 

[LUNAT]

HI

looks like P.C.B fault
can get these from HRPC PARTS CENTER