A structual survey has been carried out on my property and the report stated that the raised tie trusses were not sufficient as they have got timber added on top of them to increase the height of the roof. The roof was done before we bought the property and has been up for approx 20 years and has had no noticiable problems. Is the engineer correct? And any advice on my next steps.
failed structual survey
- Thread starter tangojess
- Start date
A structual survey has been carried out on my property and the report stated that the raised tie trusses were not sufficient as they have got timber added on top of them to increase the height of the roof. The roof was done before we bought the property and has been up for approx 20 years and has had no noticiable problems. Is the engineer correct? And any advice on my next steps.Sponsored Links
In what way has timber been added to the roof?
It is not uncommon for a roof to be counter-battened and lathed for instance.
It is not uncommon for a roof to be counter-battened and lathed for instance.
Timber battens approx 2 by 2 inches added to the top of each truss, so the roof has gained 2 inches in height. Then you have got the roofing battens running 90 degrees from the added timber with the felt and slates attached.
Cheers
Sponsored Links
Just adding 50x50 battens in that way will make no difference whatsoever. Why was the roof being inspected? If it was on behalf of a buyer are you sure it was an engineer and not just a valuer. (you have to be careful with valuers - some of them don't know their arses from their elbows)
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
