faulty kitchen doors

[reg7]

Hi anyone out there had problems with B&Q kitchen doors?.I purchased 15 White gloss doors 3years ago, they have an indent moulding and are covered with PVC laminate,after 18 months the laminate started to lift off of 2 doors,after much contact with the local store they agreed to replace these 2 doors,3 months later 2 more doors went the same way, again after more discussion with store they changed those 2,now another 1 has gone and 7 more are showing signs of going the same way.I am now in heated discussions with B&Q as to the quality and the replacement of all 15 doors,has anyone out there had similar trouble with B&Q kitchen doors THANKS REG7

 

[gday2uk]

Yes, the majority of mine have bowed, whatever size they are including base units and wall units. I have an end panel next to a dishwasher that has bent quite considerably, I presume due to the heat.
I know it's no excuse and everything should be sold fit for the purpose it was made but B&Q don't half sell an awful load of sh*t; mostly overpriced as well.

 

[JohnD]

if it is PVC it is probably plastic foil (not laminate) on MDF or chipboard

these are the cheapest doors. Sometimes you see them peeling in the shop

it is often caused by humidity or heat, maybe a kettle or a dishwasher. If it is damper on one side than the other, it will bend.