fencing lap panels to posts at angles < 90

[danlightbulb]

Hi all,

What is the best way to secure standard lap panels to posts if the required angle is less than 90 degrees?

In my garden I need to fence into and out of a corner with an (estimated)angle of between 60-80 degrees.

I don't want to force a 90 degree angle as it will effect my available driveway space considerably.

Apprieciate any comments.

Cheers, Dan.

 

[Thermo]

i put a fillet down the post if its a big angle difference you have, with the fillet planed to the angle you want and then secure the fence panel to that.

 

[masona]

If you haven't got the correct tools take it down to the timber merchant who will cut it on their bench saw or you could use a single strip of feather edge fence and build it up to the angle you want onto the post.

 

[Scoby_Beasley]

If you haven't got the correct tools take it down to the timber merchant who will cut it on their bench saw or you could use a single strip of feather edge fence and build it up to the angle you want onto the post.

BUM !! I was gonna suggest that !!