Ferroili boiler stuck in Outside Temperature Control Mode

Joined
6 Jan 2012
Messages
7
Reaction score
0
Location
Yorkshire
Country
United Kingdom
Hi,

I live in a rented house & been having problems with our boiler for ages which most the time you run a hot tap trips the boiler and means you need to reset it.

However if you ever do this when the boiler hasn't tripped instead of resetting it then it changes to OTC (outside temperature control) mode and ignores the thermostat making the house very chilly indeed!

Pressing the reset/otc button to try and switch it off again though doesn't work so once it's on, it's on! Also removing from power also doesn't work as when you start it up again it's still in OTC mode.

Is there anyway to get it back to normal again? Its happened 2 times before and after a week or so manage to fix it but can't remember what I did!
 
Sponsored Links
It's a *****y Ferroli
you live in Rented accomodation - CONTACT YOUR LANDLORD
it is his problem do you have a current Safety Certificate for the gas installation?
if not ask for one at the same time!! ;)
 
It would be worth your while to get to understand the OTC mode. It could and should give you proper control, and save on your gas bill.
 
Do you not need a sensor for it to work? Something we don't have... We only have central heating upstairs which says all you need to know about the expense the landlord spared!
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top