Merry Christmas and a hHappy New Years to one and all on this plumbing section. May I thank one and all who have assisted me when I have needed help with boiler repairs and gas issues. May Santa be good to you for being good boys and girls.
Festive season
- Thread starter DP
- Start date
Sponsored Links
Sponsored Links
I do have to say that I was not impressed by the way the new Vokeras have the bits shoe horned into a tiny case.
However I did take the trouble to get someone who could show me how they may be taken apart.
Nevertheless you have to drain the HE to remove and inspect/clean the burner!
Tony
However I did take the trouble to get someone who could show me how they may be taken apart.
Nevertheless you have to drain the HE to remove and inspect/clean the burner!
Tony
Is this the new ones with the HE set sideways Tony?
Saw these at Installer live and thought what a stuipd and awkward design to work on
The chap on the stand insisted you only needed 12mm clearance from the side of the boiler to take the burner out.
I just couldn't believe him
Saw these at Installer live and thought what a stuipd and awkward design to work on
The chap on the stand insisted you only needed 12mm clearance from the side of the boiler to take the burner out.
I just couldn't believe him
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
