- Joined
- 20 Oct 2020
- Messages
- 109
- Reaction score
- 3
- Country
Just wondering if it's possible to fill in the void under my suspended floors?
- two reception rooms approx 16m2 each.
- the void is around 4ft deep
- various electrical cables need to be considered that go to sockets throughout the room
The objectives are to improve thermal performance, install underfloor heating in both rooms and stop the somewhat annoying ingress of slugs into the rooms from the void below.
I've read the floor can be filled, then have rigid insulation board put in followed by the heating circuit and screed on the top. There is a damp course to add as well.
Please let me know if this is possible, or if it's a bad idea.
Thanks in advance.
- two reception rooms approx 16m2 each.
- the void is around 4ft deep
- various electrical cables need to be considered that go to sockets throughout the room
The objectives are to improve thermal performance, install underfloor heating in both rooms and stop the somewhat annoying ingress of slugs into the rooms from the void below.
I've read the floor can be filled, then have rigid insulation board put in followed by the heating circuit and screed on the top. There is a damp course to add as well.
Please let me know if this is possible, or if it's a bad idea.
Thanks in advance.