I've opened up my fire place with the intention of having a stove fitted. Here is a photo of what I've done so far:-
As you can see the opening is quite narrow.
Can I open it up wider myself or does this require building regulation approval?
If I can open it up wider is this actually a good idea as the chimney breast would then be a single brick in thickness? I'm thinking damp might become an issue or possibly the structural integrity?
I would need a wider lintel for the front (150mm bearing each side) but would I also need 2 small lintels for the sides?
Thanks in advance, looking forward to your help.
As you can see the opening is quite narrow.
Can I open it up wider myself or does this require building regulation approval?
If I can open it up wider is this actually a good idea as the chimney breast would then be a single brick in thickness? I'm thinking damp might become an issue or possibly the structural integrity?
I would need a wider lintel for the front (150mm bearing each side) but would I also need 2 small lintels for the sides?
Thanks in advance, looking forward to your help.