-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Fitting a Flexible Tap Connector with Isolating Valve
- Thread starter yottie
- Start date
Yes, it would normally be 1/2" for a basin tap
What comes out from the base of the basin taps? 15mm copper or do the flexis screw straight in?
It'll likely be 15mm (1/2" flexis) but you need to get ones with the right connections on each end.
Sounds like you have a 1/2" male thread at the tap end so need 1/2" female on the flexi. The isolater end would be 1/2" compression onto 1/2" existing copper feeds (or hep).
Photo would help!
Sounds like you have a 1/2" male thread at the tap end so need 1/2" female on the flexi. The isolater end would be 1/2" compression onto 1/2" existing copper feeds (or hep).
Photo would help!
Make sure they're WRAS approved too... 
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
